How do I fix error 5100 on my Canon MX492?

If you have a canon mx492 printer at your home and you are experiencing a Canon Printer Error 5100, then you need to know that this error is quite similar to the 5101 error. Because these errors are alike, therefore they have the same symptoms as well as solutions. With these errors, you would experience alternative blinking of the power lamp and error lamp twice. If you are sure of the error then below are the methods you can practice to solve the same.

Method 1:–

Turn On/Off– The first step you need to take is to turn off the printer and then turn it on after some minutes. Once when you have completed the method, you are required to move to other methods for solving the printer error.

Method 2:–

Removing protective material- One of the reasons for the printer to not print is the protective material. This material prevents the print head from moving. Therefore the solution to the issue is to open the top cover of the printer, locate the protective material and remove the same. Once when the steps are performed, the cover needs to be closed, and the printer should be turned on. If this method helps you then it is fine else you can move to the next method.

Method 3:–

Remove Jammed Paper/Foreign material– One of the possible reasons for the canon mx492 Printer Error 5100 or 5101 is the presence of jammed paper or foreign material. For removing it the necessary steps are-

  • Stop the canon printer
  • Click on the Power button for turning off the printer
  • Open the top cover, Located the jammed paper/foreign material
  • Upon locating the material, you should carefully remove the same. You also need to ensure that you do not tear down the paper as you remove the same.
  • Switch on the printer and perform the print activity.

Method 4:-

Proper Installation of the Ink Tank- One of the possible reasons for the printing activity, not occur is the incorrect installation of the ink tank. Therefore the expert is to be contacted for a check and proper installation.

Read the steps carefully, execute them well to know How To Fix Canon Mx492 Printer Error 5100, and continue with the printing task.