
Error code 0xc0000185 often appears when you start Windows PC, especially after rebooting your system. It always appears as a blue screen of death (BSOD) with the text “Your computer needs repair”.
The message may also read as follows: “Your PC boot configuration data is missing or contains errors”. Sometimes the text is followed by an error code, such as 0xc0000185. The error message clearly indicates that this error is related to boot configuration data (BCD)
In this article we provide you with the best solutions to solve the error code 0xc0000185, so keep reading.
Table of Contents
Method 1: Automatic Repair
If you have Windows OS recovery media then this method will help you to overcome this issue.
- First of all, insert the recovery media into the appropriate Port and boot your PC/Laptop from the recovery media.
- After it clicks Next on the resultant Windows Setup screen.
- Select to repair the computer at the bottom of the screen.
- You should now have on your screen the Choose An Options window.
- In this window, select the Troubleshoot feature.
- From the Troubleshoot menu, select the Advanced Options feature.

- Now in the Advanced Options window, select the Automatic Repair feature.

- Windows OS recovery media should automatically start the recovery process and try to fix
Method 2: Rebuild Boot Configuration Data
Boot Configuration Data (BCD) contains boot-time configuration parameters. If the data gets corrupted, it can cause boot problems like this, and rebuilding BCD is required to fix the issue.
- Boot your computer into Advanced Recovery Mode.
- Select Troubleshoot. Select Advanced options.

- Choose Command Prompt.

- Type the following codes and press Enter on your keyboard after typing each command:
- bootrec /scanos
- bootrec /fixMBR
- bootrec /fixBoot
- bootrec /rebuildBCD

- After the process is complete, close the Command Prompt window.
- Select Continue to test the issue.

Method 3: Run System Restore
If the issue happened because of a bad piece of software, say an app your installed or a driver that went wrong, you can use the windows build-in System Recovery feature to fix it. System Recovery allows you to roll your Windows installation back to its last working state.
- Boot your computer into Advanced Recovery Mode.
- Choose “Troubleshoot” before choosing “Advanced Options” on the resultant blue screen.


- Choose System Restore.

- Click Choose a different restore point, and click Next to select a restore point before the issue occurs.

- Follow the on-screen instructions to finish the restore.
Method 4: Run Disk Cleanup
Disk Cleanup can be used to clear out unnecessary files on your computers, such as temporary files, cached webpages, and items in your Recycle Bin.
- On your keyboard, press the Windows logo key and type disk cleanup and select Disk Cleanup.

- Select the disk that you want to clean, and the tool will tell you how much space you can free up.

- Click OK and wait until the process completes.

Method 5: Disconnect All Devices
Faulty devices can cause this annoying error code. Be sure to disconnect all devices connected to the computer, including the mouse and keyboard, if the configuration of the device allows it.
Now start the device and see if the problem persists. If the computer boots normally, it means that one of the peripherals is not working properly and needs to be replaced. To determine the culprit, connect the peripherals one by one and see if there is a problem.
I hope the article works for you to solve your problems and make your system error-free.