Canon Printer Error Code B200

How to Fix Canon Printer Error Code B200?

When using a Canon printer, users may encounter a wide variety of issues and error codes and the B200 is one of them. Usually, this error code is caused by a small hardware problem with the printer. However, in some cases, users have noticed that error code B200 also occurs on their printer due to software code malfunctions.

Now, if you are one of those users who are experiencing this error on their printer and want to know the most effective ways to fix the Canon B200 printer error code, then follow this article.

Different Solutions to Fix Canon Printer Error B200

To remove this error from your Canon printer, you need to follow some simple solutions and these solutions are given in this section. Take a look and try to perform them in the same way as directed.

Solution 1: Perform the Power Reset

The simple and more straightforward method to get eliminate the Canon B200 error is resetting your printer. Once you reset your printer by powering it off a few times, it’ll continue rest mode, and every one of its essential parts will automatically suit its proper position. So, check out the given process and quickly reset your printer.

  • First. ‘Power off’ your printer.
  • Now, press the ‘Stop’ button for two seconds.
  • Now, you’re requested to press the ‘ON’ button while holding the Stop button.
  • Keep holding the ‘ON’ button, but you have to release the ‘Stop’ button for once.
  • After that, press the ‘Stop’ button five times while still holding the ‘ON’ button.
  • Now, release both the buttons and await the printer to shut down. The power light will still blink until the printer is shut down.
  • Finally, start the printer after a while. The reset process is complete for your printer. Now attempt to print and check whether the B200 error displays or not.

Solution 2: Gently clean the printhead and wipe away any excess ink

  • Also, if you have not cleaned the printhead for a longer time, clean it right away. Lift up the printhead from the printer to initiate the cleaning process.
  • Now, dip a clean and lint-free cloth into the hot water. Using the cloth remove any old ink present on the printhead.
  • Next, take a disposable container, place a paper towel in it, and pour the hot water till the paper towel is fully dipped.
  • Now, put the printhead into the container so that the nozzles get cleaned. Take out the printhead from the container and then place it on a clean paper towel.
  • Soak the printhead for nearly 10 minutes. Thereafter, reinstall the printhead and try to print.

Solution 3: Remove All the Obstructions

The issue might also be related to the connection that has been made to the print head. What you need to do is to open the door of the printer. This way the print head will also move so that you can have access to it.

After that carefully disconnect it so that you can take out the printer. Make sure that you clean the print head properly. If you are going to clean the printhead manually, then you can do that with a non-oil cleaner. Make sure that you are going to let it sit for a while so that it can be dry.

Make sure that you are being very careful as the printheads are very fragile.

Solution 4: Reload the Printer Driver

The next method to try is to reload the printer drivers as the B200 error code can be caused in some cases by a corrupted Driver.
Also do try turning off the printer and unplugging it from the wall for 2 hours. This process can also make the printer work.

Solution 5: Resetting the Ink Tanks

  • When the ink tanks are not seated correctly then there is the possibility that this error may take place.
  • Simply reset the ink cartridges and ensure that you hear a snapping sound when placing them.
  • Also, make sure the printer is being plugged directly into the wall outlet.

Solution 6: Nozzle Check

  • Simply press the power and copy button on your printer and wait for a couple of times.
  • After doing that, the printer should start automatically and you just need to perform a nozzle check from its control panel.

Solution 7: Re-install the Printer Driver

If the above-given troubleshooting steps do not resolve the Canon B200 error, it may be a problem with the installed printer driver. So, reinstall the software by visiting the official website of Canon.

In Conclusion

These are among the best and most reliable solutions for the Canon printer error b200. If you are still unable to resolve the error, then it could mean that you need to get in touch with the canon printer services or get a new printer.

Hey, I am Kashish Trikotiya, a senior PHP developer with extensive server-side web development knowledge. Well-versed in Front-End development. Led company-wide integration with third-party APIs.

Leave a Reply

Your email address will not be published.