
Canon Pixma MX432 Printer – Wireless Setup
With the help of this guide, we are going to describe the steps to set up Canon Pixma mx432 wireless connection with your Windows and Mac device. To begin, follow these steps to make the wireless connection for the Canon mx432 printer:
- Firstly, switch on your printer, when the power is on, Light Lamp will be lit continuously.

- Next, go to the printer home button and click on it and then tap on the Network icon as you can see on the printer.


- Thereafter, printer’s basic network information screen will open, tap on the ‘LAN Settings’ > Next Press on the Wireless LAN Option on the printer screen > Select the Wireless LAN setup option



- Further, follow the WPS connection steps for Wireless printer setup
- Once the ‘ Wireless LAN Setup’ option opens, click on the WPS ( Push button method) on the screen and then click on OK.

- Then, keep on pressing and holding the WPS button on your WiFi Router and then select OK.
- Now, a message will display on the screen of printer confirming the successful connection with the wireless router.
- To make sure that the connection has been established, look for a Network icon at the bottom left of the screen.
How to Connect Wireless Canon Mx432 Printer to WPS?
Performing the Push Button method/Connecting via WPS
- Begin by pressing and holding the WPS button on the wireless router.
- Next within two minutes press the OK button on the printer.
- Tap the OK button once the “Setup menu “and “Fax settings” options appear on the screen.

- Lastly, press the “Copy” button.

- Now the Wireless Network Setup process is complete for Canon Pixma MX432 Printer.
Canon Pixma MX432 Wireless Printer Setup for Windows
Follow the below canon mx432 Wireless Printer setup for Windows :
- Make sure that the Printer, Router, and Windows PC are turned on.
- Connect your canon pixma mx432 printer via the wireless router as already mentioned above.
- Now, download the printer driver on your Windows.
- From the given list, select your printer model and hit on the “Download” option.
- Once the downloading process finishes, then finish the setup process by carefully following the onscreen instructions.
- Press now the ‘Start” button on Windows , to explore the Control Panel.

- Select “Devices and Printers” from the window that comes on next screen.
- Now, click on the “Add printer” option from the upper left corner.
- Select your printer and wait for a few moments.
- Finally, now your canon printer will be displayed with a green check mark and will be ready for use.
Steps to Connect Canon Mx432 Printer on Mac
In this section, you can find the steps for Canon Pixma mx432 wireless setup on Mac PC.
- Make sure that mac device are turned on, then, connect the canon mx432 printer to your wireless router.
- Download the Canon printer driver by visiting canon’s official website, then complete the driver software setup on mac PC.
- Tap on the Apple Menu > Select ‘System and Preference’ option.

- Select Printer and Scanner > on the next prompt display screen click on the + sign to add on your printer.

- Select your model number from the drop-down menu. Once it is added, you can see your printer in the left side of the screen.
- By following the above method you can setup Canon pixma mx432 wireless printer to Mac device easily.
We hope that you will be able to successfully set up your canon mx432 printer on Windows and Mac.